Please browse the Frequently Answered Questions below or enter a keyword to search our FAQ database:
Email Our Tech Support: Email Form
What do the “Error Register Codes” indicate.
Answer: The following is a list of the most common Register Error codes and descriptions.
Error Register = x1, Data Address Mark Not Found.
Error Register = x2, Unable to find Track 0.
Error Register = x4, Aborted Command.
Error Register = 1x, ID Not Found (Target Sector read/write error).
Error Register = 4x, Unrecoverable Error Detected (Error Correction Code).
Error Register = 8x, Bad Block Detected.
- When turning on the unit, no activity occurs after displaying the message “Initializing Image MASSter, please wait”.
- The Image MASSter displays the error message “Internal Settings are Invalid” or “Stored Configuration Data is Corrupted”.
- After starting a copy operation, the Image MASSter responds with one of the following error messages:
“Drive failed to respond to reset”
“Failed to Detect Drives”
“Failed to Initialize Drives”
- Which Notebook 2 ½” HDDs are supported by the Image MASSter?
- Can the Image MASSter copy to drives having different capacities.
- How does the unit partition the target HDD when the master drive contains multiple partitions and the target drive is larger than the master drive?
- Can the Image MASSter be used to copy non-FAT operating systems such as UNIX, and OS/2 (HPFS).
- Do target drives have to be partitioned and formatted prior to copying?
- The target drive fails to boot. What may cause this?
- What do the “Error Register Codes” indicate.
|
